|
TROUBLESHOOTING
Various tracks or trail systems may require slightly different settings. Changes made in settings should be done 1-2 clicks (LS Comp. / Rebound) or 1/4 - 1/2 turn at a time (HS Comp.).
COMPRESSION: Compression damping controls how soft / hard the fork or shock is when compressed. Some machines have only a Low Speed Compression adjuster on the shock. The Low Speed Compression damping is adjusted by clicks. Other shocks today also have a High Speed Compression adjuster in which the damping is adjusted by turns. Low Speed & High Speed Compression are terms that relate to how fast the fork or shock is being compressed. High Shaft Speed creates more damping and are not necessarily relative to motorcycle speed. High Shaft Speeds can be created at low motorcycle speed. Examples of High Shaft Speed obstacles: square edged bumps, slap down landings, lipped out jump faces, logs. Examples of Low Shaft Speed obstacles: rolling bumps / whoops, steep jump faces.
REBOUND Rebound damping controls how quickly the fork or shock comes back up after being compressed. The Rebound damping is usually adjusted by clicks.
BOTTOMING: Is caused by lack of compression damping or too soft of a spring rate. Correct by adjusting the compression damping stiffer until bottoming is under control. If you run out of adjustment and bottoming still exists consistently, a stiffer spring rate may be necessary. If spring rate is correct, too much compression damping is added and harshness is felt in forks then oil level can be raised to increase bottoming resistance. (Generally 10cc / 10mm (consult a Factory Connection Technician or your shop manual for oil level ranges).
SHOCK - Is caused by lack of compression damping or too soft of a spring rate. Correct by adjusting the compression damping stiffer until bottoming is under control. Note: If the components have a lot of time on them, bottoming or a soft, springy feeling can be an indication that a service or rebuild is necessary.
HEADSHAKE / HARSHNESS: FORK - Is generally caused by too much compression damping in the forks. Soften compression 1-2 clicks. Lighter riders for the size bike you are riding may find it necessary to change to softer fork springs. Too much rebound damping can also cause a “packing” situation in which the damping holds the forks down in a stiffer area of the travel than is needed. Soften rebound damping 1-2 clicks. Other causes can be : a) improper fork installation or binding of the fork. b) improper shock set up which causes the fork to ride too far into the stroke.
Ziggy Tip: Too much air pressure in your front tire will cause some deflection and harhness feel to your forks. We recommend only 11-13 psi. of pressure.
BACK END KICKS SIDE TO SIDE: SHOCK - Generally caused by too much compression damping on most types of terrain. Too much compression damping on square edge terrain can cause the back end to kick side to side and/or lose traction. Also, too much rebound damping will cause this because the back end is held down in a stiffer area of the travel which in turn makes it too stiff for the bumps it’s hitting (packing).
BACK END KICKS STRAIGHT UP: SHOCK - Generally caused by too little or not enough rebound damping. Slow rebound damping 1-2 clicks. Note: In some applications rebound affects compression damping. Adding too much rebound stiffens the shock damping, decreasing rebound too much softens the shock damping.
VARIOUS TRACKS:
HARD TERRAIN / BLUE GROOVE TERRAIN Generally adjust compression as soft as possible to handle square edges while still having some control with bottoming.
INTERMEDIATE / LOAMY TERRAIN Generally adjust a little stiffer for the softer terrain, jump faces and bottoming. Optimum settings still should be on the softer side for square edges and rutted corners.
SOFT / SANDY TERRAIN Generally stiffen compression and rebound. You want the bike to ride on top of the terrain, allowing the forks to ride up a little higher.
ROCKY / ROOTY TERRAIN Generally you need compression very soft to absorb the sharp hits. Rebound is generally softened to provide a very responsive feel and ride.
If you have any questions feel free to call our us - and we'll be glad to help!
|